Front cutting unit FA 650
Front cutting unit FA 650
Precision front cutting and ultra-careful handling for brochures with folded-in flaps at speeds of 4,000 to 8,000 cycles/h.
The front cutting unit is used in book production lines or as a single machine. The products are transferred horizontal in the machine, with the product spine on the right-hand side in the infeed and in the delivery. When the cutting function is disabled the machine can be operated in through-feed mode.
Benefits
For an optimal production process and to shorten production times, the FA 650 front cutting unit can be integrated in the KOLBUS perfect binding line either upstream or downstream of the three-knife trimmer (without a bypass). Maximum speed in throughfeed mode is 8,000 cycles/h.
Features
- Special equipment for cutting two products during one cycle
- Machine start via block detection device and light barrier
- Smart Line Module for energetic recovery of operating power in the line network
Technical data
Technical data
Size range (Thickness x Width x Height)
trimmed
max. 350 x 480 x 50 mm | min. 100 x 125 x 3 mm
untrimmed
max. 375 x 480 x 50 mm | min. 105 x 125 x 3 mm
Mechanical speed
max. 4,000 cycles/h
cutting two products during one cycle:
feeding: max. 6,000 products/h with 3,000 cuts/h
Automatic adjustment of the machine speed to the input capacity (Also in the through-feed mode)
Net production is subject to sizes, materials, etc.
Your contacts
Your contacts
