Three-knife Trimmer HD 143.P
Three-knife Trimmer HD 143.P
For three side trimming of book blocks and brochures, used as an individual machine or as a unit within book production lines 4,200 cuts/h or 2,700 single products/h
The HD 143.P is the ideal downstream machine for perfect binders with output up to 7,000 cycles/h or as an upstream machine for book production lines operating at 30 and 70 cycles/min. This three-knife trimmer is also ideal for linking to a SIGLOCH book block gluing system operating at up to 45 cycles/min.
Benefits
By combining tried-and-tested mechanical systems with ultra-modern electronics, KOLBUS can supply operator-friendly machines with very short make-ready times. They will operate to the highest quality criteria over long service lives. Data input and belt control (option) are handled directly at the three-knife trimmer.
Features
The HD 143.P is simple to operate and fitted with the KOLBUS Copilot® system to deliver all the benefits of a highly automated operation. Book blocks arrive at the three-knife trimmer on a conveyor belt. Intake frequency is controlled via an intermittently operating roll to match the speed of the machine and the format of the block. Cutting sequence: 1st cut front blade, 2nd cut side blades. The trimmed products are picked up gently by a gripper and deposited on a conveyor belt.
Technical data
Technical data
Size range (Width x Height x Thickness)
trimmed
min. 100 x 100 x 2 mm | max. 305 x 420 x 80 mm
untrimmed
Left-hand/right-hand infeed: max. 320 x 450 x 80 mm
Straight infeed: max. 310 x 430 x 80 mm
Mechanical speed
up to 4,200 cuts/h