Three-knife Trimmer HD 143.P

Three-knife Trimmer HD 143.P

For three side trimming of book blocks and brochures, used as an individual machine or as a unit within book production lines 4,200 cuts/h or 2,700 single products/h

Three knife trimmer HD 143.P KOLBUS
Three knife trimmer HD 143.P

The HD 143.P is the ideal downstream machine for perfect binders with output up to 7,000 cycles/h or as an upstream machine for book production lines operating at 30 and 70 cycles/min. This three-knife trimmer is also ideal for linking to a SIGLOCH book block gluing system operating at up to 45 cycles/min.

Benefits

By combining tried-and-tested mechanical systems with ultra-modern electronics, KOLBUS can supply operator-friendly machines with very short make-ready times. They will operate to the highest quality criteria over long service lives. Data input and belt control (option) are handled directly at the three-knife trimmer.

Features

The HD 143.P is simple to operate and fitted with the KOLBUS Copilot® system to deliver all the benefits of a highly automated operation. Book blocks arrive at the three-knife trimmer on a conveyor belt. Intake frequency is controlled via an intermittently operating roll to match the speed of the machine and the format of the block. Cutting sequence: 1st cut front blade, 2nd cut side blades. The trimmed products are picked up gently by a gripper and deposited on a conveyor belt.

Straight infeed for single block processing Three-knife trimmer HD 143.P KOLBUS
Straight infeed for single block processing
Right-hand infeed with intermittent roll for integrated counting and stacking Three-knife trimmer HD 143.P KOLBUS
Right-hand infeed with intermittent roll for integrated counting and stacking
Products are lifted and delivered by grippers Three-knife trimmer HD 143.P KOLBUS
Products are lifted and delivered by grippers
Trimming station Three-knife trimmer HD 143.P KOLBUS
Trimming station

Technical data

Technical data

Size range (Width x Height x Thickness)

trimmed

min. 100 x 100 x 2 mm | max. 305 x 420 x 80 mm

untrimmed

Left-hand/right-hand infeed: max. 320 x 450 x 80 mm

Straight infeed: max. 310 x 430 x 80 mm


Mechanical speed

up to 4,200 cuts/h

Your contacts

Your contacts

– Technik/Engineering –
Karen Rauter
engineering(at)KOLBUS.de