SW.L 400

Puncher SW.L 400

For punching round holes and shaped holes, max. 40 cycles/min

Stand alone: up to 65 cycles/h possible

Puncher SW.L 400

Benefits

board blanks or prepared cases are stacked in the board feeder of SW.L 400. They are separated out of the magazine and during a short stop, round and/or shaped holes are punched. Precise and smooth transport through the machine is ensured by transport belts and pressure rolls. Loading capacity of the board feeder magazine allows for several minutes of production at maximum speed.

Features

  • Good ergonomic design – simple and comfortable feeding of boards
  • Board feeder: Optional stream and pile feeding
  • 4 single punching units for diameter from 8 mm to 16 mm
Punching unit SW.L 400
Delivery

Technical data

Technical data

Size range of box case
width x height x thickness
max. 680 x 405 x 4 mm
min. 205 x 140 x 1 mm

Number of punches
up to 10 punches
(up to 5 punches per side)

Diameter

max. 20 mm
min. 8 mm


Mech. speed
max. 40 cycles/min
Net production is subject to sizes, materials etc.

Your contacts

Your contacts

– Technik/Engineering –
Karen Rauter
engineering(at)KOLBUS.de