Front cutting unit FA 650

Front cutting unit FA 650

Precision front cutting and ultra-careful handling for brochures with folded-in flaps at speeds of 4,000 to 8,000 cycles/h.

Front cutting unit FA 650 KOLBUS
Front cutting unit FA 650

The front cutting unit is used in book production lines or as a single machine. The products are transferred horizontal in the machine, with the product spine on the right-hand side in the infeed and in the delivery. When the cutting function is disabled the machine can be operated in through-feed mode.

Benefits

For an optimal production process and to shorten production times, the FA 650 front cutting unit can be integrated in the KOLBUS perfect binding line either upstream or downstream of the three-knife trimmer (without a bypass). Maximum speed in throughfeed mode is 8,000 cycles/h.

Features

  • Special equipment for cutting two products during one cycle
  • Machine start via block detection device and light barrier
  • Smart Line Module for energetic recovery of operating power in the line network
Products are fed in laid flat - front cutting unit FA 650 KOLBUS
Products are fed in laid flat.
The flap covers are lifted very carefully by means of vacuum belts - Front cutting unit FA 650 KOLBUS
The flap covers are lifted very carefully by means of vacuum belts.
Cutting station for front cutting - Front cutting unit FA 650 KOLBUS
Cutting station for front cutting
Cutting station (detail) - Front cutting unit - FA 650 KLOBUS
Cutting station (detail)

Technical data

Technical data

Size range (Thickness x Width x Height)

trimmed

max. 350 x 480 x 50 mm | min. 100 x 125 x 3 mm

untrimmed

max. 375 x 480 x 50 mm | min. 105 x 125 x 3 mm


Mechanical speed

max. 4,000 cycles/h

cutting two products during one cycle:

feeding: max. 6,000 products/h with 3,000 cuts/h

Automatic adjustment of the machine speed to the input capacity (Also in the through-feed mode)

Net production is subject to sizes, materials, etc.

Your contacts

Your contacts

– Vertrieb/Sales –
Susanne Wellpott
sales(at)KOLBUS.de
– Technik/Engineering –
Karen Rauter
engineering(at)KOLBUS.de